Unidrain (281)

The grating is placed on a countersunk bearing in the frame, to hold it securely. Only for use with ClassicLine frame.

Rist Unidrain classic met een lengte van 1601 en een breedte van 800 mm.

Rooster Unidrain classic 1601 met een lengte van 900 mm.

The grating is placed on a countersunk bearing in the frame, to hold it securely. Only for use with ClassicLine frame.

The grating is placed on a countersunk bearing in the frame, to hold it securely. Only for use with ClassicLine frame.

De hoogte van de Rist Unidrain kolom 1602 is 900 mm.

Rist Unidrain inca met een lengte van 1603 en breedte van 800 mm.

Afvoerfitting Unidrain 1001 700 mm.

Afvoerfitting Unidrain 1001 800 mm.

Afvoerfitting Unidrain 1001 1000 mm.

For shower cubicles with open right-hand side, glass screen or similar. The drain unit has two wall flanges.

For shower cubicles with open right-hand side, glass screen or similar. The drain unit has two wall flanges.

For shower cubicles with open right-hand side, glass screen or similar. The drain unit has two wall flanges.

For shower cubicles with open right-hand side, glass screen or similar. The drain unit has two wall flanges.

For shower cubicles with open left-hand side, glass screen or similar. The drain unit has two wall flanges.

For shower cubicles with open left-hand side, glass screen or similar. The drain unit has two wall flanges.

For shower cubicles with open left-hand side, glass screen or similar. The drain unit has two wall flanges.

Vaste Unidrain 1003 1000 mm hoek naar rechts.

Can be freely positioned against the back wall, independent of any side walls. The drain unit has one wall flange.

Can be freely positioned against the back wall, independent of any side walls. The drain unit has one wall flange.

Can be freely positioned against the back wall, independent of any side walls. The drain unit has one wall flange.

Unidrain armatuur 1004 1000 mm zonder flens.

Can be freely positioned against the back wall, independent of any side walls. The drain unit has one wall flange.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor. NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Frame Unidrain 1500 300X12 T/1005: Frame Unidrain 1500 300X12 T/1005