Eltako DL-Flash-USB USB-interface 1-kanaals DIN-rails, DIN-rails

Unnlink 1080P 60Fps Video Capture Card HDMI naar USB & Type C voor Schakelaar PS4 TV Box PC naar Telefoon Tablet

Storage controller (RAID), 2 channels, SATA 6Gb/s low profile, 600 MBps, RAID 0, 1, JBOD, PCIe 2.0 x1

USB-poortblokker (pak van 5)

Caractéristiques: 1. Convient pour Raspberry Pi PI3 PI2 B + Carte d'extension GPIO. 2. Apparence exquise 3. Opération de bricolage spécification: Taille: Carte d’extension GPIO env. 7.5 * 6 cm 3 * 2.4 in Carte de prototypage: Environ. 16.5 * 5.5 * 1 cm 6.5 * 2.2 * 0.4 in Liste des paquets: 1 * Carte d’extension GPIO 1 * breadboard Ligne de connexion de broches 1 * 40P Résistance 8 * 1K Résistance 8 * 10K 4 * LED (jaune) 4 * LED (rouge) 4 * clé 10 * 25 mm Jumper Wires A 10 * 25 mm Jumper Wires B

OPTA-uitbreidingsmodule, programmering met codeys, 16 35 analoge / digitale (0-10V/12-24V) ingangen, 8 SSR-uitgangen (2 A), voedingsspanning 12…24 V DC, interface met OPTA PLR (alleen 8A.04-83xC) en...

Controller voor opslag, SATA 6Gb/s / SAS 12Gb/s / PCIe 4.0 (NVMe), laag profiel, PCIe 3.0 x8

Diffused addressable RGB strip (Digital RGB) - 5 volt, compatibel met ASUS Aura Sync, Asrock Polychrome Sync, Gigabyte Fusion RGB & MSI Mystic Light, 18 LED-lampjes. Wanneer het alleen is aangesloten op SATA zonder een 3-pins ARGB-connector zal het oplichten in regenboogkleuren. Inclusief controller en afstandsbediening voor het regelen van licht en ventilatorsnelheid zonder moederborden. De controller ondersteunt alleen 6-pins connectoren en heeft een lengte van 30 cm. Premium RGB-strip die zorgt voor een diffuus premium uiterlijk. In tegenstelling tot traditionele RGB-strips is elke LED niet zichtbaar bij dit product en biedt het meer uniforme verlichting.

Storage controller (RAID), 2 channels, SATA 6Gb/s low profile, 600 MBps, RAID 0,1, JBOD, PCIe 2.0 x1

Storage controller (RAID), 2 channels, SATA 6Gb/s low profile, 600 MBps, RAID 0, 1, JBOD, PCIe 2.0 x1

Storage controller (RAID), 4 channel, SATA 6Gb/s low profile, 600 MBps, RAID 0, 1, 5, 10, JBOD, PCIe 2.0 x2

Storage controller (RAID), 4 Kanaal, SATA 6Gb/s, laag profiel, RAID 0, 1, 5, 10, JBOD, PCIe 2.0 x2

GPU power monitoring device measures and records graphics card power through the 12VHPWR connector, displays real-time watts/volts/amps on an OLED, detects connector type, monitors temperatures and issues an audible alarm for over-current, over-temperature or misconnected/incorrect cables. Designed for in-line measurement, the WireView Pro GPU connects between the graphics card and the PSU to log power usage with a 60-second averaging mode and to detect power peaks and incorrect cable specifications. OLED display showing current W, V, A, min/max, 60s average (RAVG) and total energy (Wh) Records power consumption for analysis and comparison, with a special 60-second measurement cycle Connector detection for 150 W / 300 W / 450 W / 600 W specified cables Internal temperature sensors at the power connectors plus two external 10K NTC sensors (5 cm and 20 cm included) Audible buzzer with adjustable temperature and current limits, warns on incorrect or loose cable connections Available in Normal and Reverse 12VHPWR orientations and connects to the PSU via the power cable Be aware that the WireView PCB and connectors can become very hot during use—up to about 60°C with air-cooled cards and up to 100°C with water-cooled cards without airflow—so allow it to cool before handling.