The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch. Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys). The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized. Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone. Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise. * The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case. ** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself. ASSEMBLY INSTRUCTIONS: 1. Start the installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left. 3. Put the frame with the glass already mounted on your phone - it will ensure a precise fit and make application easier. 4. Pull the starter film to start the process of automatically sticking the glass on the screen. 5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface. 6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion. Done! Enjoy a perfectly applied screen protector.
